|
Assemble the Tank
|
|
| Put the legs and the tank pieces in the case to make sure
they fit.
|
|
|
Remove the protective film from the inside of each leg piece. |
|
| Space three clamps along the front of the tank. The tank should
be even at the top and flush along the front of the leg pieces.
|
|
| Now stand the tank up and place another clamp at the top rear
of the tank. Line the back of the tank with the top of the legs.
|
|
| Make sure the legs both stand flat on the bench.
|
|
| Carefully lay the tank on its face. Use the applicator to
apply the solvent to the seam along each side of the front of the tank.
|
